|
Quinn Downhole Separation Systems
Separate oil and gas from water downhole and inject
water into a disposal zone in the same well bore.
A diagram of Q-Sep(TM)
Quinn Rod Pump Downhole Oil/Water & Gas/Water Separation Systems
can be found here in .pdf
format. It may take from 1 to 2 minutes for this file to load
with a 28.8kbps modem. You must have Adobe Acrobat© Reader©
to view this document. If you do not have Adobe Acrobat©
Reader©, please go to this page.
Q-Sep(TM)
G
A dual reciprocating rod pump system that allows oil and water
to separate due to gravity in the wellbore and then pumps an oil
rich stream to surface while disposing of the majority of the
produced water downhole.
· reduces water handling cost
· saves power
· incremental oil production
Q-Sep(TM)
H
Utilizes hydrocyclone separation technology to separate oil and
water downhole, providing greater flexibility than gravity separation.
· no sump required below production zone
· heavier oil
· high production wells
· horizontal wells
Q-Sep(TM)
Gas R
A rod insert pump system for pumping water off a gas well and
injecting the water into disposal zone in the same well bore.
· reduces water handling costs
· increases gas production
Q-Sep(TM)
Gas T
A tubing pump system for pumping water off a gas well.
· high volume production
Enquiries:
Reg Prostebby, CET
Manager, Engineering
Ph. (403) 347-1128
Fax (403) 343-3210
e-mail: RProstebby@quinnpumps.com
|
