Compressor Pump - Quinn's Gaseous Fluid Pump

The Quinn Gas Compressor Pump is designed to pump wells with high gas oil ratios. In the past, this has been difficult to produce using various artificial lift systems. The heavy duty design of this pump can be run to depths of 13,000 feet (3960m). The pump components can be designed for any corrosive environment.

Search

Back

Scale Pump - Quinn's Scale Pump System

The Scale Pump design allows producers to effectively pump wells where scale and gypsum have historically been a problem. Wells with these types of problems are generally low or marginally producing wells. Therefore, the market demands an economical pump design. Quinn's design, combined with new materials and coatings, addresses this problem providing producers another tool with which to combat scale. The design minimizes the chance of scale build-up which can cause the plunger to seize. The design also decreases the pressure drops within the pump. In essence, this lessens the amount of scale which can precipitate out.

Pull-Down Pump - Quinn's Heavy Oil Pump System

Quinn's Heavy Oil Pump design enables higher fluid volumes with the same surface equipment. The Pull-Down pump minimizes internal barrel pressure on the downstroke. This allows the hydrostatic head to create an additional down force and maintain tension on the rod string. This also enables existing pumping equipment to operate more efficiently by alleviating rod fall problems associated with viscous fluid production. This pump design has allowed producers to increase their stroke rate significantly as well as reducing pump equipment loading.

Big Bore Pump - Quinn's High Volume Pump

Quinn's Big Bore Pumps have been developed over the past several years, through service work with producers, where large volume production is required. Quinn's Big Bore Pumps are available in all sizes ranging from 3-1/4" to 7-3/4" bore. These pumps can be manufactured in many different configurations: insert, tubing, and oversized tubing pumps.